ATLAS - elastic impactable acetabular cup -

The Esop^® range

Esop^® a full range :

The TA6V ELI titanium alloy Esop cup comes in 12 sizes from 46 to 68 mm OD in 2 mm increments.
In order to use Esop in some particular situations (including with revisions and dysplasia acetabulums), cups in extreme sizes are available : 40, 42, 44, and 70, 72, 74.
Because of the small number of cases, those sizes are not part of the usual range offered to surgeons, but they can be supplied on request. These 6 sizes are not FDA approval-yet.

The polyethylene cores are available in 2 ID sizes : 28 and 32 mm.

Atlas

WARNING : Except in North America, Esop^®-cup is distributed under the mark ATLAS^®

The features and numbers below are based on the OD of the cup
Matching PE inserts are available in various IDs.

DESIGNATION SIZE AND PART NUMBER

CUP OD in mm 46 48 50 52 54 56 58 60 62

Esop III-P 241363 241364 241365 241366 241367 241368 341369 341370 241371

Esop IV 217413 217414 217415 217416 217417 217418 217419 217420 217421

INSERT
(inside diameters in mm) INSERT C
PE 22,2 232139 232140 232141 232142 232143 232144 232145 232146 232147

STANDARD
INSERT
PE 28 217522 217523 217524 217525 217526 217528 217529 217530 217531

EDGE
INSERT
PE AL 28 217461 217462 217463 217464 217465 217466 217467 217468 217469

ALUMINA
28 INSERT . . 234104 234105 234106 234107 234108 234109 234110

STANDARD
INSERT
PE 32 . . 217538 217539 217540 217541 217542 217543 217544

DESIGNATION EXTREME SIZES

CUP OD in mm 40 42 44
64 66 68 70 72 74

Esop III-P . . . 241372 241373 241374 . . .

Esop IV 222506 222510 217412 217422 217423 217424 217425 217426 217427

INSERT
(inside diameters in mm) INSERT C
PE 22,2 222508 222509 217489
217499 217500 217501 217502 217503 217504

STANDARD
INSERT
PE 28 . . . 217532 217533 217534 217535 217536 21537

EDGE
INSERT
PE AL 28a . . . 217470 217471 217472 217473 217474 217475

ALUMINIUM
OXIDE
28 INSERT . . . . . . . . .

STANDARD
INSERT
PE 32 . . . 217545 217546 217547 217548 217549 217550

Diam 6.5 mm SCREWS Length in mm 15 20 25
30 35 40 45 50

Part n° 207110 207111 207113
207115 207117 207120 207122 207123

Welcome - The various Esop - Primary stability - Insert stability - Insert thickness - Secondary stability - Explant analysis - Low-friction
Surgical procedure - Clinical data - Quality requirement - The inventor - Contact - I nternational distribution